MELAquick 12+ / 12+ p
Big on the inside.
Small on the outside.
The fast autoclave helps to save time and money in legally-compliant reprocessing. This is because handpieces, prophylaxis instruments and other common instruments can be sterilized between patient treatments.
-Sterilization in record time
of up to 12 contra-angle handpieces in only 7 minutes
-Compact device design
for a significantly smaller footprint
-Individual drying system
with drying pump or compressed air connection
-Highest user friendliness
with MELAG 4-key concept and digital tools
-Maximum process safety
through integrated interface for documentation
-Quality made in Germany
developed, designed and produced in Berlin
The requirement.
The requirements for reprocessing dental instruments are defined by the Robert Koch Institute (RKI). Transfer instruments for "semi-critical" use must be reprocessed after each patient, preferably in a validated, machine disinfection and cleaning process. If an automated reprocessing procedure is not used, manual reprocessing may be chosen, but it must be followed by sterilization of the instruments.
"Critical" transmission instruments in use for periodontal, endodontic and surgical treatments must of course also be finally sterilized after the machine reprocessing prescribed for these cases.
The solution.
This fast autoclave helps you save time and money in the RKI-compliant reprocessing of transmission instruments. Because in only approx. 7 minutes, contra-angle handpieces, prophylaxis instruments and much more can be sterilized quickly and safely between patient treatments.
Using the MELAquick 12+ is the ideal alternative to sterilizing transfer instruments in a common practice autoclave with its inevitably longer operating times. MELAquick 12+ can accommodate up to 12 transmission instruments. The fast operating times enable complete practice hygiene even without the purchase of additional transmission instruments.
Product highlights at a glance.
-Reprocessing: with highest quality.
The fractionated gravity method creates the ideal conditions for sterilization safety in
accordance with European Standard 13060. Drying takes place by connecting the MELAquick 12+ to the compressed air supply. No compressed air connection is required for the operation of the MELAquick 12+ p, as it has an integrated drying system.
-Compact dimension: Large inside, small outside.
The MELAquick Series requires significantly less installation space than all other autoclaves. Two 5 litre containers are provided for the demineralized feed water as well as for the already used and re-condensed water. These containers can be placed below the work surface.
-Operation: No compromises.
All programs and options can be selected easily and quickly using the four soft keys found on the display. Three class S programs are provided : One Quick-Program for unwrapped instruments and two programs for wrapped instruments. All programs in accordance with the European Standard 13060.
-Versatile interfaces and connections.
No matter whether the serial connection for documentation, connections for external feed water tanks or the connection for compressed air (only with MELAquick 12+) - the MELAquick Series has versatile connection options to best meet your individual requirements.
Used Products
-Vacuklav 44 B+ Evolution
-MELAtherm 10 DTA
-MELAseal 200
Accessories for MELAquick
-Loading
-Water Treatment
-Documentation
-Test body
-Chamber cleaning
-Others